Ram Mounts
RAM® Composite Round Plate with Ball – C Size
R439,00
RAM® Universal Composite Marine Electronic Ball
R674,00
RAM® Composite Double Socket Arm – C Size Short
R544,00The RAP-201U-B, short double socket arm, has a socket at both ends that accommodates 3.81cm (1.5″) ball bases. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Features
- Low-profile design with an overall length of 9.04cm (3.56″) and a socket-to-socket length of 6.35cm (2.5″)
- Attaches to any C size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
- Made of high-strength composites for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
RAM® Composite Double Socket Arm – C Size Medium
R609,00The RAP-201U consists of a medium double socket arm that accommodates 3.81cm (1.5″) C size ball bases, device holders, and adapters. This is the standard RAM double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.
Features
- Medium length double socket arm has an overall length of 14.45cm (5.69″) and a socket-to-socket length of 11.84cm (4.66″)
- Attaches to any C size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
- Made of high-strength composites for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
RAM® Universal Composite Marine Electronic Mount – Short
R1, 609,00
RAM® Universal Composite Marine Electronic Mount – Medium
R1, 649,00
RAM® Pin-Lockâ„¢ Marine Electronic Mount – D Size Short
R5, 429,00
RAM® Drill-Down Marine Electronic Mount
R2, 249,00The RAM-111U consists of a medium double socket arm, 6.35cm (2.5″) diameter round base, and 15.88 cm (6.25″) X 5.08 cm (2″) rectangle base. The round base includes a 3.81cm (1.5″) C size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 3.81cm (1.5″) C size rubber ball and contains a variety of pre-drilled holes that are compatible with several marine electronic devices, including fishfinders and chartplotters.
Features
- Complete flat surface, drill-down mounting solution with an overall height of 18.67cm (7.35″)
- RAM® Mounts ball and socket technology allows for near-infinite adjustability
- Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
- Backed by a lifetime warranty
RAM® Universal Marine Electronic Mount – C Size Short
R2, 189,00The RAM-111U-B consists of a short double socket arm, 6.35cm (2.5″) diameter round base, and 15.88 cm (6.25″) X 5.08 cm (2″) rectangle base. The round base includes a 3.81cm (1.5″) C size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 3.81cm (1.5″) C size rubber ball and contains a variety of pre-drilled holes that are compatible with several marine electronic devices, including fishfinders and chartplotters.
Features
- Complete flat surface, drill-down mounting solution with an overall height of 13.27cm (5.225″)
- RAM® Mounts ball and socket technology allows for near-infinite adjustability
- Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
- Backed by a lifetime warranty
RAM® Universal Marine Electronic Mount – C Size Long
R3, 069,00The RAM-111U-D consists of a 6.35cm (2.5″) diameter round base that contains the universal AMPS hole pattern, 9 inch double socket arm and 15.88 cm (6.25″) X 5.08 cm (2″) rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Features
- Complete flat surface, drill-down mounting solution with an overall height of 27.13cm (10.68″)
- Includes C size long socket arm, 6.35cm (2.5″) diameter flat surface drill-down base, and a 15.88 cm (6.25″) X 5.08 cm (2″) marine electronic adapter for fishfinders depthfinders and more; RAM® Mounts ball and socket technology allows for near-infinite adjustability
- Compatible with select Garmin, Lowrance, Raymarine and Humminbird Fishfinders and GPS chartplotters
- Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
- Backed by a lifetime warranty
RAM® Pin-Lockâ„¢ Marine Electronic Mount – C Size Medium
R2, 469,00
RAM® X-Grip® Large Phone Holder with Ball – C Size
R1, 689,00The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today’s vehicles, the X-Grip IV is the phablet cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant cradle is ready to compliment your phablet and become the most useful accessory in your vehicle. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Features
- Spring-loaded ‘X’ design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
- Compatible with any C size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
- Backed by a lifetime warranty
RAM® X-Grip® Large Phone Holder with Ball & Vibe-Safe™ Adapter
R2, 669,00The RAM X-Grip Large Phone Holder with Ball & RAM Vibe-Safe Adapter (RAM-HOL-UN10B-462) is a combination of the classic RAM X-Grip device holder and the RAM Vibe-Safeour vibration damping accessory is designed to protect electronic devices from a wide range of vibration frequencies. The RAM X-Grip can rotate between portrait and landscape by loosening the center screw. It is compatible with B size RAM components, making it easy to upgrade your current mounting solution. This product comes with an optional device tether that is recommended for outdoor applications. The holder is compatible with handheld devices that will fit the dimensions listed below, it is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Features
- RAM® Vibe-Safe™ dampens a wide range of vibration frequencies
- Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
- Unique structure and thoughtfully designed with all industries in mind
- Backed by a lifetime warranty
RAM® X-Grip® Large Phone Holder with Ball – B Size
R1, 419,00The popular spring-loaded RAM X-Grip phone holder features an ‘X’ design that expands and contracts to provide a perfect fit for your device even if it’s in a case. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite, the RAM X-Grip phone holder is compatible with a wide variety of RAM double socket arms and mounting bases. This large version of the RAM X-Grip fits phones ranging from 4.45cm (1.75″) to 11.43cm (4.5″) in width and keeps your device completely functional and accessible. No matter what double socket arm and mounting base you pair the RAM X-Grip with, RAM ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your phone by providing shock and vibration damping. For outdoor applications like being used as a motorcycle phone mount the RAM X-Grip includes a device tether that is recommended for added security and peace of mind.
Features
- Spring-loaded ‘X’ design for large phones with rubber caps sports great holding power without hiding your phone; includes optional device tether for peace of mind during rugged use
- Compatible with any B size RAM® Mounts double socket arm; ball and socket technology allows for near-infinite adjustability
- Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
- Backed by a lifetime warranty